Huan Yeh Precision Machinery Co., Ltd.

Mechanical properties of VL-1000 (2 Linear guide way)

Tue, 11 May 2021 18:16:48 +0800

4 bearings on the fixing end of triaxial motor to increase servo rigidity.
3 axis design with precision 40 ball screw.
Entire machine and accessories with unique off-the-ground design and with tool cabinet, desk and chair.
Laser inspection is applied for every machine after installation to ensure perfect quality.
High precision ball bar circle inspection.
Dynamic Vibration inspection.

Mechanical properties of VL-800 (2 Linear guide way)

Tue, 11 May 2021 18:16:23 +0800

4 bearings on the fixing end of triaxial motor to increase servo rigidity.
3 axis design with precision 40 ball screw.
Entire machine and accessories with unique off-the-ground design and with tool cabinet, desk and chair.
Laser inspection is applied for every machine after installation to ensure perfect quality.
High precision ball bar circle inspection.
Dynamic Vibration inspection.

VT series (Vertical Turret Head) VT630

Thu, 13 May 2021 11:20:47 +0800

X1300 / Y600 / Z650

Integrated automatic lubricating system.
Cooling system
Each travel axis is equipped with limit switches to ensure safety.
Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
The X, Y axis slideways coated with low-friction property material TURCITE-B.
Standard electrical and electronic components are adopted. Electrical and electronic circuits are properly concealed.
Controls are integrated on a panel, enhancing simple and easy operation thus avoiding fatigue and increase working efficiency.
Consolidated rigid cast-iron design treated annealing process providing high precision and reliable operation.
Low table height convenient for work piece handling.

VT series (Vertical Turret Head) VT550

Tue, 11 May 2021 18:02:48 +0800

X1100 / Y520 / Z600

Integrated automatic lubricating system.
Equipped with Cooling system
Each travel axis is equipped with limit switches to ensure safety.
Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
The X, Y axis slideways coated with low-friction property material TURCITE-B.
Standard electrical and electronic components are adopted. Electrical and electronic circuits are properly concealed.
Controls are integrated on a panel, enhancing simple and easy operation thus avoiding fatigue and increase working efficiency.
Consolidated rigid cast-iron design treated annealing process providing high precision and reliable operation.
Low table height convenient for work piece handling.
Can be fitted with a rotary table for easy and time saving 5-side machining.

VH series (Vertical & Horizontal Head) VH780

Thu, 13 May 2021 11:11:46 +0800

X2000 / Y1200 / Z1000

The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
The X, Y axes are protected by stainless steel telescopic covers.
The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
The spindle runs on precise angular contact bearings.
The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
All gears in milling head are hardened and precision ground for quiet running.
The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
The powerful spindle motor gives a high chip removal rate.
Choice of Fanuc or Mitsubishi CNC controller.
All models can be converted into CNC controlled system.

VH series (Vertical & Horizontal Head) VH650B

Thu, 13 May 2021 11:07:44 +0800

X1700 / Y1050 / Z950

The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
The X, Y axes are protected by stainless steel telescopic covers.
The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
The spindle runs on precise angular contact bearings.
The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
All gears in milling head are hardened and precision ground for quiet running.
The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
The powerful spindle motor gives a high chip removal rate.
Choice of Fanuc or Mitsubishi CNC controller.
All models can be converted into CNC controlled system.

VH series (Vertical & Horizontal Head) VH550

Thu, 13 May 2021 11:04:29 +0800

X1500 / Y900 / Z790

The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
The X, Y axes are protected by stainless steel telescopic covers.
The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
The spindle runs on precise angular contact bearings.
The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
All gears in milling head are hardened and precision ground for quiet running.
The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
The powerful spindle motor gives a high chip removal rate.
Choice of Fanuc or Mitsubishi CNC controller.
All models can be converted into CNC controlled system.

VH series (Vertical & Horizontal Head) VH480

Thu, 13 May 2021 11:04:15 +0800

X1300 / Y850 / Z780

The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
The X, Y axes are protected by stainless steel telescopic covers.
The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
The spindle runs on precise angular contact bearings.
The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
All gears in milling head are hardened and precision ground for quiet running.
The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
The powerful spindle motor gives a high chip removal rate.
Choice of Fanuc or Mitsubishi CNC controller.
All models can be converted into CNC controlled system.

VH series (Vertical & Horizontal Head) VH450

Thu, 13 May 2021 10:38:29 +0800

X1100 / Y720 / Z780

The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
The X, Y axes are protected by stainless steel telescopic covers.
The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
The spindle runs on precise angular contact bearings.
The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
All gears in milling head are hardened and precision ground for quiet running.
The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
The powerful spindle motor gives a high chip removal rate.
Choice of Fanuc or Mitsubishi CNC controller.
All models can be converted into CNC controlled system.

V series (Vertical Head) V850

Thu, 13 May 2021 16:32:55 +0800

X1700 / Y800 / Z600

The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
The X, Y axes are protected by stainless steel telescopic covers.
The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
The spindle runs on precise angular contact bearings.
The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
All gears in milling head are hardened and precision ground for quiet running.
The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
The powerful spindle motor gives a high chip removal rate.
Choice of Fanuc or Mitsubishi CNC controller.
All models can be converted into CNC controlled system.