Mechanical properties of VL-800 (2 Linear guide way)

Description
  • 4 bearings on the fixing end of triaxial motor to increase servo rigidity.
  • 3 axis design with precision 40 ball screw.
  • Entire machine and accessories with unique off-the-ground design and with tool cabinet, desk and chair.
  • Laser inspection is applied for every machine after installation to ensure perfect quality.
  • High precision ball bar circle inspection.
  • Dynamic Vibration inspection.
Table Table size 1050 X 600 mm
T-slot 100 X 18 mm X 5T
Max. Loading 800 kg
Travel Three Axes Travel 800 X 600 X 560 mm
Spindle Nose to Table Surface 150~710 mm
Spindle Center to Column Slide Ways 650 mm
Spindle Spindle Taper BT40
Spindle Speed 10000 rpm  Belt type
Feedrate 3 axes Slide Ways Linear Way
3 axes Rapid Feedrate 36/36/36 m/min
3 axes Cutting Feedrate 10/10/10 m/min
ATC Tool Magazine type Arm
Tool Selection Bi-direction shortest path
Max. Tool Diameter X Length Φ150 X 300 mm
Max. Tool Weight 8 kg
Tool Shank BT40
ATC Capacity 24T
Motor Spindle Motor(cont./30 min) 7.5/11 kw
X/Y/Z axis Servomotor X,Y: 2.0kw / Z: 3.0kw BS
X/Y/Z axis Ball Screw Φ40 X Pitch 12
Miscellaneous Floor Space Measurement (L X W X H) 3350 X 2250 X 2500 mm
N.W  (Approximate weight) 6500 kg
Splash Guard Fully splash guard

All specifications and designs are subject to change without prior notice.

Standard Accessories
  • Mitsubishi M80 controller (10.4” color LCD)
  • Spindle speed 8000 rpm, BT-40
  • Spindle oil cooler
  • Screw type chip conveyor with cart
  • High Pressure water and air gun
  • Leveling bolts and leveling blocks
  • Tool and tool box
  • Air blast through spindle
  • Work lamp
  • Alarm lamp
  • Auto power off
  • Auto lubrication system
  • Rigid tapping
  • RS232 interface
  • CF card and CF card interface
  • Remote MPG (Hand wheel)
  • Heat exchange for control cabinet
  • Operation manual
  • Full splash guard
  • Flushing device
Optional Accessories
  • Transformer(Export only)
  • BT-40 Direct Drive spindle: 12000/15000rpm
  • Around spindle cutting coolant unit
  • Chain type chip conveyor
  • Rotary table (0125/170/210/255)
  • Tool length measurement system
  • Coolant through spindle unit (20/30/50 BAR)
  • Three axis optical scale (HEIDENHAIN)
  • Air conditioner